DSP223
Model:DSP223
size:
application:Conference room, multi-function lecture hall, stadium, bar, slow rocking bar, KTV, theater
Advantage:
Two-way DSP network Dante audio transmission module amplifier
●Two-way DANTE/AES67 network,two-way digital,two-way analog audio signal input
●Dual network ports,network TCP/IP control can realize multiple device management,remote power on and off
●Adopt 4.3-inch IPS capacitive touch screen,built-in DSP digital processor (input and output EO,Q value,gain setting:delay EO,time:compression limit:limit:input output FIR:mode:buit-in sine,pink noise,white noise signal generation:matrix:input mode selection,storage preset)support multiple connection methods:USB.TCP/P
●The amplifier can be identified by software on site,the working status of the amplifier can be remotely monitored in realtime,the matrix mode can be freely switched,and the temperature of the amplifier module can be displayed in real time
●Input signal source master/slave priority setting,and automatic signal source switching
●Standard Fir function,supports 4x2048 Taps:2x2048 Taps
●Software control,can control media matrix and professional processor at the same time
●Modular design,DSP,Dante modularization,can cancel Dante module is DSP module
●Provide supporting PC software,provide supporting communication protocol
●Sensitivity 4 channels +-12DB,50 preset programs can be pre-stored inside the amplifier Remote monitoring:Computer network remote centralized monitoring of 255 amplifiers,can adjust the function parameters of each amplifier in the network in realtime,and DSP sound effect settings,clear and simple
Specifications：
| 型号 | DSP223 |
Output power lkHz,0.5%THD+N Stereo mode 8Ω | 2X2350W |
| Stereo mode 4Ω | 2X435W* |
| Stereo mode 2Ω | 2X7000W* |
Bridge-mono mode 8Ω | 1X8700W* |
Bridge-mono mode 4Ω | 1X14000W* |
Frequency response(1W/8) | 20Hz-20kHz 士1dB |
Total harmonic distortion THD+N | ≤0.1% |
Signal-to-noise ratio | ≥100dB |
Input common mode rejection (1kHz) | ≥50dB |
Separation(Full power at 8Ω/1kHz) | ≥60dB |
Input impedance(balanced/unbalanced) | 20kΩ(balanced)/10kΩ(unbalanced) |
Voltage gain(rated power @8Ω /1V) | 23，26，29，32，35，38，41，44dB |
Power consumption of the whole machine (stereo mode 8Ω) | 5000W |
power supply | AC~220V-230V/50Hz |